How to Change the Water Filter in the Refrigerador Whirlpool?

Are you the proud owner of a refrigerador whirlpool refrigerator? If so, it’s important to keep up with regular maintenance in order to keep your appliance running at its best. One part of that maintenance includes changing the water filter. In this blog post, we’ll show you how to easily change the water filter in your refrigerador whirlpool refrigerator.

Step1: Open the Fridge Door

Before you can change your Whirlpool Refrigerator Water Filter, you will first need to open the refrigerator door. Depending on your model, there may be a release lever or handle on the outside of the fridge door.

Pull the lever or handle, and the door should swing open. If your refrigerator does not have a release lever, you can still open the door by pressing firmly on both sides of the door near the top. Once the door is open, you will be ready to move on to the next step.

Step2: Remove the Old Filter

Before you start, make sure to unplug the refrigerador whirlpool from the power outlet. Next, locate the water filter at the top of the fridge on the inside wall. To remove the old filter, twist it counterclockwise and pull it out. Depending on your model, it may require more force to remove the filter, so you may need to grip it firmly with both hands. Once it is removed, discard it properly and clean up any spilled water that may have occurred during removal.

After this, you will be ready to install the new filter. Take a new whirlpool refrigerator water filter out of its packaging and prepare to insert it into your Whirlpool Refrigerador. Line up the arrows located on the filter and insert them into the designated compartment. Turn the filter clockwise until a tight seal is formed between the refrigerator and the filter itself.

How to Change the Water Filter in the Refrigerador Whirlpool?

Step3: Insert the New Filter

Once the old filter has been removed, take the new filter for your Whirlpool refrigerador and insert it into the designated slot. It should fit snugly in place, so you may need to apply slight pressure until it clicks in.

Before continuing, make sure it is firmly in position. Depending on the model of refrigerador you have, there may be a tab or arrow to indicate which way the filter should be facing. Refer to the owner’s manual if you are unsure about how to orient the filter.

When all is said and done, the new Whirlpool refrigerator water filter should be properly installed. Check to make sure no leaks occur when dispensing water from the fridge. If everything looks alright, close the door and press down lightly to ensure that it is closed tightly.

Step4: Close the Fridge Door

Once you have securely inserted the new Whirlpool refrigerator water filter, close the refrigerator door and make sure that it is firmly shut. Then, press and hold the “reset” button on the front of the Whirlpool refrigerador for 3 seconds. This will indicate that the water filter has been replaced. Finally, make sure to run water through the dispenser for a few seconds to flush any air out of the new filter.

Depending on your model, the light indicator may stay illuminated when the new filter is installed. However, this does not indicate an issue with your Whirlpool Refrigerator Water Filter or with your Whirlpool Refrigerador – just reset it again if this happens. Additionally, remember to discard the old filter after installation and mark down the date when you installed the new one so that you know when to replace it next time.


Changing the water filter in a Refrigerador Whirlpool is an easy process that can help maintain the optimal performance of your fridge. By following the steps outlined above, you can quickly and easily replace the old filter with a new one, ensuring that yourwhirlpool refrigerador will continue to provide you with clean and clear drinking water.

Leave a Comment